Frequently asked questions:
| Author: Anonymous | Date: 8/21/2007 3:51:26 PM |
| Question When supplying a fire rated door, is fire and smoke seal to be fitted all around the door or just ... |
|
| Author: Niall Rowan | Date: 10/30/2009 11:54:51 AM |
| Answer For intumescent only (fire) seals, usually only the top and both vertical edges require ... |
|
| More ... | |
| Author: Anonymous | Date: 5/2/2007 9:44:45 AM |
| Question Could you tell me if BS476: Part 4, EN ISO1182:2002, ASTM E-136 & AS 1530.1-1994 are equivalent? |
|
| Author: Niall Rowan | Date: 7/6/2009 2:12:24 PM |
| Answer The answer is that they are all types of non-combustibility test in which a small solid ... |
|
| More ... | |
| Author: Anonymous | Date: 6/19/2007 2:58:38 PM |
| Question Can a non combustable board (ie Supalux) achieve both Euro Class B and Fire Resistance testing of ... |
|
| Author: | Date: 3/6/2009 4:26:30 PM |
| Answer The simple answer is maybe, but not on its own. Non-combustibility or the ability to achieve a ... |
|
| More ... | |
| Author: Anonymous | Date: 6/7/2007 11:08:54 AM |
| Question Is MDF Class 0 as standard? |
|
| Author: Niall Rowan | Date: 12/3/2008 1:14:03 PM |
| Answer Standard i.e. untreated MDF is usually class 3 as are most untreated timber products. There are ... |
|
| More ... | |
| Author: Anonymous | Date: 6/10/2008 6:27:21 PM |
| Question Please advise - Which class would a PMMA plastic, Tp(b) rated material relate to? Class 3? |
|
| Author: | Date: 6/10/2008 6:27:34 PM |
| Answer There is no direct comparison I'm afraid. The use of Tp(a) and Tp(b) etc in Approved Document B ... |
|
| More ... | |
| Author: Anonymous | Date: 6/19/2007 6:01:01 PM |
| Question Is there a direct comparison between ASTM-E84 Classes A through C and the DIN 4102 classes A1, B1, ... |
|
| Author: | Date: 4/6/2008 10:34:58 PM |
| Answer The simple answer is no. They are very different tests measuring different properties. ASTM E84 is ... |
|
| More ... | |
| Author: Anonymous | Date: 9/21/2007 12:59:34 PM |
| Question Can we add a decorative non fire resistant trim (to give a flat door the look of a panelled door) ... |
|
| Author: Niall Rowan | Date: 10/19/2007 6:45:53 PM |
| Answer Provided the trims do not significantly affect the structure of the door i.e. they are just pinned ... |
|
| More ... | |
| Author: Anonymous | Date: 9/20/2007 3:06:03 PM |
| Question Can cable trays, clips and unistrut be directly clipped and mounted on to intumescent painted ... |
|
| Author: Colin Keeley | Date: 10/3/2007 9:36:41 AM |
| Answer The guidane note written by the ASFP concerning 'Overcladding of Reactive Coatings on Structural ... |
|
| More ... | |
| Author: Anonymous | Date: 9/12/2007 9:28:31 AM |
| Question To be fire resisting is it necessary to provide an intumescent strip to a fire door? |
|
| Author: | Date: 9/14/2007 3:52:56 PM |
| Answer This is a common question. For a door to be fire resisting, it only has to pass the test which ... |
|
| More ... | |
| Author: Anonymous | Date: 8/22/2007 2:17:54 AM |
| Question IS there a comparison between the Fire Classification done for building products under the BS and ... |
|
| Author: Niall Rowan | Date: 9/14/2007 1:12:17 PM |
| Answer There is no comparison per se as the British tests and the European tests measure different ... |
|
| More ... | |
| Author: Anonymous | Date: 8/30/2007 7:31:46 AM |
| Question We want to incorporate polyisocynurate aluminium embossed duct panels for HVAC application. This ... |
|
| Author: Niall Rowan | Date: 8/31/2007 9:34:05 AM |
| Answer The class you mention is the panel's reaction to fire performance. Class 0 is a good performance ... |
|
| More ... | |
| Author: Anonymous | Date: 8/14/2007 11:51:43 AM |
| Question Are unvented lobbies between flats and escape corridors essential on flat schemes? |
|
| Author: | Date: 8/22/2007 4:17:38 PM |
| Answer Assuming you are referring to what is termed "Protected entrance halls" in AD-B (see diagram 2 ... |
|
| More ... | |
| Author: Anonymous | Date: 7/18/2007 3:39:47 PM |
| Question what is the difference between flame tested and fire rated? |
|
| Author: Niall Rowan | Date: 7/23/2007 3:08:33 PM |
| Answer Both these terms are misleading and meaningless. Flame tested How big is the ... |
|
| More ... | |
| Author: Anonymous | Date: 7/6/2007 9:07:35 AM |
| Question Please advise - Which class would a PMMA plastic, Tp(b) rated material relate to? Class 3? |
|
| Author: Niall Rowan | Date: 7/6/2007 11:56:53 AM |
| Answer There is no direct comparison I'm afraid. The use of Tp(a) and Tp(b) etc in Approved Document B ... |
|
| More ... | |
| Author: Anonymous | Date: 6/16/2007 8:50:50 AM |
| Question What is EN14041? |
|
| Author: Niall Rowan | Date: 6/29/2007 5:31:33 PM |
| Answer The product standard for textile and resilient floorings. For more info on the actual standard ... |
|
| More ... | |
| Author: Anonymous | Date: 5/14/2007 12:44:51 PM |
| Question What is the difference between NFPA 255 and BS 467 part 6 & 7 Class O. Which one is better? |
|
| Author: Niall Rowan | Date: 6/8/2007 5:02:04 PM |
| Answer NFPA 255, or the Steiner Tunnel as it is more commonly known, is a North American reaction to ... |
|
| More ... | |
| Author: Anonymous | Date: 5/22/2007 6:07:46 PM |
| Question Please tell me if it acceptable to lock fire doors in a corridor? There are two sets of doors in a ... |
|
| Author: Niall Rowan | Date: 6/6/2007 6:39:45 PM |
| Answer In the direction of escape they should not lock the doors. Assuming they are only used for ... |
|
| More ... | |
| Author: Anonymous | Date: 5/24/2007 4:51:07 PM |
| Question I am constructing a merchandising unit at the Dome. Amongst other materials I am using FR rated ... |
|
| Author: Niall Rowan | Date: 5/24/2007 4:59:17 PM |
| Answer You need to get the certificates - or more correctly the test reports - from the manufacturer. He ... |
|
| More ... | |
| Author: Anonymous | Date: 11/2/2006 8:52:39 AM |
| Question How do we check whether a certificate issued by you is genuine? |
|
| Author: Niall Rowan | Date: 5/22/2007 3:45:34 PM |
| Answer Dear Ivo, The only foolproof way to check is to insist upon an original version of the ... |
|
| More ... | |
| Author: Anonymous | Date: 5/15/2007 4:14:45 PM |
| Question We know that to comply with the BS 476 : part 22 we should to install hardware items tested ... |
|
| Author: Niall Rowan | Date: 5/16/2007 10:13:16 AM |
| Answer We would generally only recommend products that have been third party certificated as this ... |
|
| More ... | |
| Author: Anonymous | Date: 5/9/2007 5:18:34 PM |
| Question Can you advise on how to increase the fire insulation value of a steel clad steel framed building ... |
|
| Author: Niall Rowan | Date: 5/11/2007 6:21:04 PM |
| Answer There are several ways you could do it - mainly by increasing the level of fire protection to ... |
|
| More ... | |
| Author: Anonymous | Date: 5/10/2007 3:39:55 PM |
| Question For communal areas in dwellings/blocks, do we need to use Class O paints only? (both New Build and ... |
|
| Author: Niall Rowan | Date: 5/11/2007 6:01:44 PM |
| Answer It all depends on the building in question, but generally in communal areas and circulation ... |
|
| More ... | |
| Author: Anonymous | Date: 4/16/2007 10:02:05 AM |
| Question Is B-s2,d0 to EN13501-1:2002 equivalent to BS476 Part 7 Class 1Y? |
|
| Author: Niall Rowan | Date: 5/2/2007 1:47:38 PM |
| Answer The first point to make is that there are no direct equivalences between the Euroclasses and the ... |
|
| More ... | |
| Author: Anonymous | Date: 3/22/2007 4:37:11 PM |
| Question Our new buildings are fitted with Polish fire doors which have no markings and the certificate is ... |
|
| Author: | Date: 4/30/2007 6:04:16 PM |
| Answer You should demand from your supplier or builder documentation (that you can read) that shows ... |
|
| More ... | |
| Author: Anonymous | Date: 3/29/2007 3:19:18 PM |
| Question If I wanted to manufacture my own fire doors specifically to comply for loft conversions, could you ... |
|
| Author: | Date: 4/30/2007 5:44:14 PM |
| Answer We could certainly test such a door and also certificate its production, but unless you are ... |
|
| More ... | |
| Author: Anonymous | Date: 4/2/2007 4:43:53 PM |
| Question What is class "o" classification, I believe it is stricter than Class "1" ? |
|
| Author: Niall Rowan | Date: 4/24/2007 6:34:32 PM |
| Answer Indeed it is. Class 1 indicates a good performance in terms of surface spread of flame. Class 0 ... |
|
| More ... | |
| Author: Anonymous | Date: 4/4/2007 4:38:42 PM |
| Question Does BS 476 apply to site safety products, such as scaffolding protection, or only to permanent ... |
|
| Author: Niall Rowan | Date: 4/5/2007 9:38:02 AM |
| Answer BS 476 is used in many sectors for very different end-uses. However, in the building field, it ... |
|
| More ... | |
| Author: Anonymous | Date: 2/26/2007 5:22:46 PM |
| Question How does the temperature exposure history in the fire resistance test in BS EN 1363 compare to real ... |
|
| Author: Niall Rowan | Date: 3/21/2007 4:33:00 PM |
| Answer This is a very interesting question and one that fire scientists, fire consultants and many ... |
|
| More ... | |
| Author: Anonymous | Date: 3/14/2007 9:15:31 AM |
| Question I have a first floor area constructed of 22mm thick WISA Spruce and it has the following details ... |
|
| Author: Niall Rowan | Date: 3/15/2007 1:35:47 PM |
| Answer In the UK there are generally no controls on the flammability of floor coverings, so you would be ... |
|
| More ... | |
| Author: Anonymous | Date: 3/6/2007 6:04:27 PM |
| Question In a medium rise apartment block in timber frame, should the inner lining of the external wall ... |
|
| Author: Alex Manning | Date: 3/8/2007 12:45:34 PM |
| Answer It is assumed that the timber frame is constructed of an external layer and an internal layer, ... |
|
| More ... | |
| Author: Anonymous | Date: 3/5/2007 10:03:14 AM |
| Question Could you tell me if BS 476 part 7 is the same test as ASTM E 84? |
|
| Author: | Date: 3/6/2007 12:53:34 PM |
| Answer No it is not. The BS 476: Part 7 test measures flame spread across a surface exposed to ... |
|
| More ... | |
| Author: Anonymous | Date: 2/14/2007 9:51:07 AM |
| Question Can we use fire doors manufactured in England to BS standards in France? Are the regulations the ... |
|
| Author: Niall Rowan | Date: 2/23/2007 11:41:23 PM |
| Answer The short answer is no. The French authorites will only accept tests to French or European ... |
|
| More ... | |
| Author: Anonymous | Date: 2/14/2007 10:27:27 AM |
| Question Does a block of flats with common parts, need to comply with the Regulatory Reform Order and appoint/select a competent person? |
|
| Author: Niall Rowan | Date: 2/21/2007 11:05:53 AM |
| Answer The guidance document on Sleeping accomodation published by the Department of Communities and Local Government (ISBN-13: 978 1 85112 817 4) contains in its scope: "All premises where the main use is to provide sleeping accommodation, e.g. hotels, guest houses, B&Bs, hostels, residential training centres, holiday accommodation and the common areas of flats, maisonettes, HMOs and sheltered housing (other than those providing care – see Residential care premises), but excluding hosptials, residential care premises, places of custody and single private dwellings"So the simple answer is yes. Contact our fire safety consultants by clicking here if you need any more guidance or information. |
|
| Author: Anonymous | Date: 2/14/2007 12:22:06 PM |
| Question Is there an fire rated MDF available that achieves class 'O' ? If so, would the fire rating be ... |
|
| Author: Niall Rowan | Date: 2/21/2007 10:26:49 AM |
| Answer You do not specify what you mean by fire rated. Do you mean a fire resisting MDF that is also has a ... |
|
| More ... | |
| Author: Anonymous | Date: 11/20/2006 7:30:12 PM |
| Question Would my existing edwardian solid pine/oak doors pass as fire doors if U had the expanding strip ... |
|
| Author: | Date: 2/9/2007 10:41:09 AM |
| Answer Fitting doors closers and intumescent (expanding) strips would help, but if the doors themselves ... |
|
| More ... | |
| Author: Anonymous | Date: 2/7/2007 2:53:42 PM |
| Question I am a little confused about the fire door certification system in UK. Is there any uniform ... |
|
| Author: Bob Williams | Date: 2/9/2007 9:35:47 AM |
| Answer The minimum regulatory requirement for fire resisting doors in the UK is for them to be tested ... |
|
| More ... | |
| Author: Anonymous | Date: 2/1/2007 7:15:24 AM |
| Question A non-combustibility fest for a material (rockwool) in accordance with B.S. 476: Part 4 1970 have ... |
|
| Author: Niall Rowan | Date: 2/6/2007 5:48:40 PM |
| Answer A material that is non-combustible is automatically Class O without the need for further testing. |
|
| More ... | |
| Author: Anonymous | Date: 10/5/2006 2:02:32 PM |
| Question How can i achieve 1 hour fire resistency to the underside of a mezzanine floor which will be used ... |
|
| Author: Niall Rowan | Date: 1/17/2007 5:28:17 PM |
| Answer I really don't have a straight answer for this. You have already ruled out the obviuous solution ... |
|
| More ... | |
| Author: Anonymous | Date: 12/13/2006 2:19:11 PM |
| Question What is an M1 fire rating? |
|
| Author: Niall Rowan | Date: 1/17/2007 5:00:35 PM |
| Answer The class you mention is a French class and is obtained by undertaking the French Epiradiateur test ... |
|
| More ... | |
| Author: Anonymous | Date: 11/29/2006 12:21:47 PM |
| Question We are proposing to construct a jumbo stud wall in a retail unit, height 5m, 1 hour fire rating, ... |
|
| Author: Niall Rowan | Date: 1/5/2007 3:58:39 PM |
| Answer We are getting a lot of enquires regarding MDF used in fire rated situations. Typically, the ... |
|
| More ... | |
| Author: Anonymous | Date: 12/8/2006 9:52:00 PM |
| Question Log house fireprotection requirements. What are the regulations regarding fireprotection of ... |
|
| Author: Niall Rowan | Date: 1/5/2007 3:57:27 PM |
| Answer Log cabins or houses or any other form of buildings are subject to the same requirements for ... |
|
| More ... | |
| Author: Anonymous | Date: 12/22/2006 2:47:58 PM |
| Question How do you calculate Hp/A for beams and columns for intumescent paint, is there a mathematical ... |
|
| Author: Phil Crewe | Date: 1/4/2007 11:10:14 AM |
| Answer The section factor is a measure of how quickly a steel section heats up. A heavy section will ... |
|
| More ... | |
| Author: Anonymous | Date: 11/2/2006 3:55:31 PM |
| Question Is a decorative paint system defined as a wall lining? |
|
| Author: Niall Rowan | Date: 11/6/2006 2:45:37 PM |
| Answer Approved Document B (Fire Safety) defines internal linings under the functional requirement as ... |
|
| More ... | |
| Author: Anonymous | Date: 10/29/2006 10:44:57 AM |
| Question If a board product that has been fire tested in Europe meets the class A2 - s1 d0, what ... |
|
| Author: Niall Rowan | Date: 11/2/2006 12:35:38 PM |
| Answer It means that it has a Euroclass reaction to fire performance of A2 which is approximately ... |
|
| More ... | |
| Author: Anonymous | Date: 10/23/2006 10:08:28 AM |
| Question Is it necessary for a thermal insulation company to be FIRAS certified if as part of their works ... |
|
| Author: Bob Williams | Date: 10/27/2006 6:40:39 PM |
| Answer All fire stopping and fire sealing installation should be considered as specialist work and ... |
|
| More ... | |
| Author: Anonymous | Date: 10/26/2006 3:49:36 PM |
| Question I am designing fixed furniture in a library. can you tell me how i might go about determining ... |
|
| Author: Niall Rowan | Date: 10/26/2006 9:13:55 PM |
| Answer If it is furniture you are designing (fixed or otherwise), it will usually be exempt from ... |
|
| More ... | |
| Author: Anonymous | Date: 10/19/2006 4:58:38 PM |
| Question What is the difference between a material that has a rating of class 1 and class 1Y under part 7 of ... |
|
| Author: Niall Rowan | Date: 10/20/2006 2:56:46 PM |
| Answer A material that has a Y suffix added to its surface spread of flame classification demonstrates ... |
|
| More ... | |
| Author: Anonymous | Date: 10/18/2006 1:50:54 PM |
| Question Where can I get testing carried out to ASTM E 84, the Steiner Tunnel? |
|
| Author: Niall Rowan | Date: 10/18/2006 2:01:39 PM |
| Answer Bodycote Materials Testing Canada Inc. can perform this test, contact details are as ... |
|
| More ... | |
| Author: Anonymous | Date: 9/29/2006 2:58:37 PM |
| Question What does bsen number stand for? |
|
| Author: Niall Rowan | Date: 10/4/2006 5:26:02 PM |
| Answer BS stands for 'British Standard'. British Standards are produced by the British Standards ... |
|
| More ... | |
| Author: Anonymous | Date: 9/15/2006 10:40:26 AM |
| Question Could you please clarify the fire performance of typical mdf sheets? it's easy to undertsand the ... |
|
| Author: Niall Rowan | Date: 9/15/2006 12:26:47 PM |
| Answer What do you mean by 'fire rating'? If you mean reaction to fire performance, then the fire rating ... |
|
| More ... | |
| Author: Anonymous | Date: 9/6/2006 10:37:52 AM |
| Question we are looking to install a pvc illuminated sign into a shopping centre. The material has a French ... |
|
| Author: Janet Murrell | Date: 9/8/2006 12:06:05 PM |
| Answer The classification M2 used in France is very loosely similar to a Class 2 in this country ... |
|
| More ... | |
| Author: Anonymous | Date: 7/5/2006 2:32:01 PM |
| Question When does BS EN 1634 come into force? It mentions on your website that it would run in parallel ... |
|
| Author: Niall Rowan | Date: 8/24/2006 5:25:19 PM |
| Answer BS EN 1634 'came into force' in 2002. That is to say it was recognised by our building ... |
|
| More ... | |
| Author: Anonymous | Date: 8/7/2006 7:37:15 AM |
| Question What are the differences in EN BS/DIN 13501 and BS 476 Part 7? Are they equivalent? |
|
| Author: Niall Rowan | Date: 8/24/2006 5:25:11 PM |
| Answer BS EN 13501 or DIN EN 13501 are identical European standards for the classification of products ... |
|
| More ... | |
| Author: Anonymous | Date: 8/19/2006 4:36:28 PM |
| Question If a timber partioned wall has 10 flammable layers of paint, can it be upgraded to class O using a ... |
|
| Author: Janet Murrell | Date: 8/24/2006 5:24:40 PM |
| Answer The simple answer to this is most definitely no! In general, most paints are tested as single ... |
|
| More ... | |
| Author: Anonymous | Date: 7/21/2006 10:53:12 AM |
| Question Hi there What is the difference between class 1 and AA? when considering roofing material |
|
| Author: | Date: 8/24/2006 10:53:43 AM |
| Answer Class 1 refers to BS 476: Part 7, the surface spread of flame test. AA is a class from the BS 476: ... |
|
| More ... | |
| Author: Anonymous | Date: 8/8/2006 10:08:49 AM |
| Question Do we achieve 1/2 hour fire rating to a stud partition using 70mm 'C' stud and sheeted one side ... |
|
| Author: | Date: 8/17/2006 11:59:38 AM |
| Answer The British Gyspum White Book is now available on-line and gives the answer to your ... |
|
| More ... | |
| Author: Anonymous | Date: 8/16/2006 3:18:00 PM |
| Question If a material achieves the classification B2 under DIN 4101 Pt 1 does that mean it meets the ... |
|
| Author: Niall Rowan | Date: 8/16/2006 3:59:26 PM |
| Answer I am afraid it does not. In the first instance there is no direct table of equivalences between ... |
|
| More ... | |
| Author: Anonymous | Date: 8/10/2006 9:53:05 AM |
| Question Is there a professional designation for fire engineers, such as Chartered Fire Engineer? |
|
| Author: Jon Pagan | Date: 8/16/2006 1:42:39 PM |
| Answer Yes, the Institute of Fire Engineers can give Chartered Engineer status to engineers who have the ... |
|
| More ... | |
| Author: Anonymous | Date: 8/2/2006 2:55:59 PM |
| Question You have compared the French calls M1 rating with UK class 0, what temperture would this resist and ... |
|
| Author: Niall Rowan | Date: 8/15/2006 12:49:44 PM |
| Answer The British rating Class 0 and the French rating M1 are achieved by undertaking various reaction to ... |
|
| More ... | |
| Author: Anonymous | Date: 6/6/2006 10:48:01 AM |
| Question What is the requirement of material to meet Fire Spread rating M1? any equivalent classification ... |
|
| Author: Niall Rowan | Date: 6/21/2006 2:03:08 PM |
| Answer The class you mention is a French class and is obtained by undertaking the French Epiradiateur test ... |
|
| More ... | |
| Author: Anonymous | Date: 5/22/2006 10:25:17 PM |
| Question I have a French product for coating expanded polystyrene EPS that claims an M1 fire rating. Does ... |
|
| Author: | Date: 5/24/2006 6:18:45 PM |
| Answer I'm afraid it does not. The tests used in the USA and those used in France measure fundamentally ... |
|
| More ... | |
| Author: Anonymous | Date: 5/24/2006 2:05:50 PM |
| Question Which is the correct test procedure for fire resistant grills (with intumescent material) ? EN ... |
|
| Author: Niall Rowan | Date: 5/24/2006 6:03:31 PM |
| Answer This is an interesting question. You are referring to a fire damper which uses intumescent as the ... |
|
| More ... | |
| Author: Anonymous | Date: 3/27/2006 1:00:20 PM |
| Question I am trying to ascertain the period of fire resistance of an existing 9mm thick asbestos ceiling ... |
|
| Author: Niall Rowan | Date: 5/3/2006 6:32:34 PM |
| Answer As far as we are aware, there is no information in the public domain which will give you an ... |
|
| More ... | |
| Author: Anonymous | Date: 11/2/2005 12:12:45 PM |
| Question How do pvc and hdpe differ in their reaction to accidental domestic fires, particularly is their a ... |
|
| Author: Niall Rowan | Date: 5/3/2006 6:31:49 PM |
| Answer A brief explanation is as follows... PVC pvc or polyvinylchloride is widely ... |
|
| More ... | |
| Author: Anonymous | Date: 4/24/2006 2:29:01 PM |
| Question Will a Class 0 MDF board still provide a Class 0 performance when faced with a decorative wood ... |
|
| Author: Niall Rowan | Date: 4/25/2006 2:54:38 PM |
| Answer The performance of a composite panel such as you describe depends on the combined performance of ... |
|
| More ... | |
| Author: Anonymous | Date: 3/30/2006 4:53:52 AM |
| Question What do the codes TT, ITT, MM, IMM, ITM, ITC, TM in the section of "Approved door type" mean? |
|
| Author: Niall Rowan | Date: 4/20/2006 4:36:33 PM |
| Answer The first (optional) digit is whether the door has Intumescent seals 'I' means it has, nothing ... |
|
| More ... | |
| Author: Anonymous | Date: 3/17/2006 11:51:01 AM |
| Question Where can I get a copy of the standard hydrocarbon fire heating curve and the cellulosic fire ... |
|
| Author: Niall Rowan | Date: 4/20/2006 4:24:28 PM |
| Answer You can get both of these curves in the European Standard EN 1363 Fire resistance tests Part 2: ... |
|
| More ... | |
| Author: Anonymous | Date: 2/13/2006 10:37:41 AM |
| Question How can I compare results for a material tested to BS476 part 7 with another material tested to ... |
|
| Author: Niall Rowan | Date: 2/13/2006 12:33:38 PM |
| Answer Unfortunately, you can't. This is because the test procedures are very different and measure ... |
|
| More ... | |
| Author: Anonymous | Date: 1/29/2006 5:33:06 PM |
| Question Do you have a register that I can view online? I would like to view test certificates for products ... |
|
| Author: Niall Rowan | Date: 2/10/2006 9:44:40 AM |
| Answer To view the CERTIFIRE Register, go to 'certifying' then 'CERTIFIRE' then click on the link 'To view ... |
|
| More ... | |
| Author: Anonymous | Date: 12/13/2005 3:30:16 PM |
| Question Please confirm if half hour fire resistence can be achieved with the use of MDF and if so, what ... |
|
| Author: Niall Rowan | Date: 2/2/2006 6:04:10 PM |
| Answer It depends on what you are looking at. Do you mean upgrading a door by putting an MDF facing on ... |
|
| More ... | |
| Author: Anonymous | Date: 3/14/2005 8:11:06 AM |
| Question If I have the number of a test certificate, can I have a copy of it? |
|
| Author: Niall Rowan | Date: 1/10/2006 5:34:52 PM |
| Answer There are two issues to deal with here; the type of document you are referring to and your right ... |
|
| More ... | |
| Author: Anonymous | Date: 12/8/2005 4:02:33 PM |
| Question Is there a ready reference of comparisons between BS476 pt 6 and DIN 4102? Specifically I need to ... |
|
| Author: Niall Rowan | Date: 1/10/2006 5:20:45 PM |
| Answer It is very difficult to make comparisons between different national tests - especially 'reaction ... |
|
| More ... | |
| Author: Anonymous | Date: 10/19/2005 2:51:09 PM |
| Question We have made some desks from a Class 1 MDF. This then has a wood micro-veneer on top, followed by ... |
|
| Author: Niall Rowan | Date: 10/21/2005 3:34:08 PM |
| Answer Unfortunately, it probably does need to be retested. The class 1 MDF may well achieve class 1 ... |
|
| More ... | |
| Author: Anonymous | Date: 8/30/2005 12:08:39 PM |
| Question Would putting 150mm rockwool insulation mat laid directly above a mineral fibre fire rated ceiling ... |
|
| Author: Dominic Hankinson | Date: 9/8/2005 9:41:05 AM |
| Answer The fire resistance performance of the ceiling will almost definitely be influenced by the ... |
|
| More ... | |
| Author: Anonymous | Date: 8/5/2005 9:37:19 AM |
| Question BS 476: Part 4 or Pt 11 are non combustibilty tests for materials. Can these tests be used solely ... |
|
| Author: Niall Rowan | Date: 8/5/2005 2:04:21 PM |
| Answer The tests you refer to only determine the heat contribution of the material under intense fire ... |
|
| More ... | |
| Author: Anonymous | Date: 4/5/2005 1:17:19 PM |
| Question Can I have a list of warrington certified manufactures in UAE? |
|
| Author: Niall Rowan | Date: 7/7/2005 4:03:29 PM |
| Answer Currently we only have two manufacturers that are certified under our CERTIFIRE third party ... |
|
| More ... | |
| Author: Anonymous | Date: 6/26/2005 11:45:13 AM |
| Question Fire door requirements for a house which is having a loft conversion. Do we need to fit fire doors ... |
|
| Author: Niall Rowan | Date: 6/27/2005 2:53:24 PM |
| Answer Assuming you are having this work carried out on the auspices of Local Authority Building Control, ... |
|
| More ... | |
| Author: Anonymous | Date: 4/27/2005 1:59:14 PM |
| Question a customer has enquired as to the temperature class 0 is tested to in relation to 100% Acrylic ... |
|
| Author: Niall Rowan | Date: 6/3/2005 5:00:38 PM |
| Answer Temperature is only one part of measuring of heat and is roughly equivalent to voltage with ... |
|
| More ... | |
| Author: Anonymous | Date: 4/26/2005 4:34:45 PM |
| Question Can French fire test standards be directly compared to British fire test standards? |
|
| Author: Niall Rowan | Date: 4/26/2005 5:20:50 PM |
| Answer The answer depends on the type of the fire test you want to compare. For 'Reaction to ... |
|
| More ... | |
| Author: Anonymous | Date: 2/22/2005 6:33:31 PM |
| Question Is it true that "The EN Methods are identical whether you test them in Germany, France, UK etc and ... |
|
| Author: Niall Rowan | Date: 3/23/2005 12:10:48 PM |
| Answer The EN test methods are identical whichever country the test is carried out in. The only ... |
|
| More ... | |
| Author: Anonymous | Date: 2/1/2005 2:49:12 PM |
| Question What do R, E and I mean in relation to fire resistance performance? |
|
| Author: Niall Rowan | Date: 2/10/2005 12:10:10 PM |
| Answer R refers to resistance to collapse (loadbearing capacity), which applies to loadbearing elements ... |
|
| More ... | |
| Author: Anonymous | Date: 2/1/2005 2:09:57 PM |
| Question Can you explain what Class O means? |
|
| Author: Niall Rowan | Date: 2/10/2005 12:09:51 PM |
| Answer Class O is the highest National product performance classification for lining materials. It is ... |
|
| More ... | |
|
More:
|
||
|
News
Fire Industry Expert announces plans for Retirement |
|
|
Interesting Articles/Viewpoint
Paint Expert Joins Warrington Certification as FIRAS Site Inspector |
|
 |
FAQ
When supplying a fire rated door, is fire and smoke seal to be fitted all ... |
|
 |
Maps
Directions to warringtonfire's offices and laboratories. |
|
 |
Downloads / Registered Users' Area
Files available to registered users. |
|
|
|
Careers with Exova warringtonfire
Quality Engineers - Warrington Certification (x2) - Mon-Fri |
|
 |
Links
Useful Links |
|
